Turbulence modelling of the aerodynamic interaction of OGV wakes and diffuser flow

Different turbulence closures were used to predict the flow interaction between the wakes created by compressor outlet guide vanes（OGVs） and a downstream annular pre-diffuser.Two statistical turbulence...     

Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

Topological Studies of Three-dimensional Flows in a High Pressure Compressor Stator Blade Row without and with Boundary Layer Aspiration

This paper presents a numerical study of the flow topologies of three-dimensional (3D) flows in a high pressure compressor stator blade row without and with boundary layer aspiration on the hub wall. The stator blade is representative of the first stage operating under transonic inlet conditions and the blade design encourages development of highly complex 3D flows. The blade has a small tip clearance. The computational fluid dynamics (CFD) studies show progressive increase of hub corner stall with the increase in incidence. Aspiration is implemented on the hub wall via a slot in the corner between the hub wall and the suction surface. The CFD studies show aspiration to be sensitive to the suction flow rate; lower rate leads to very complex flow structures and increased level of losses whereas higher rate renders aspiration effective for control of hub corner separation. The flow topologies are studied by trace of skin friction lines on the walls. The nature of flow can be explained by the topological rules of closed separation. Furthermore, a deeper analysis is done for a particular case with advanced criterion to test the non-degeneracy of critical points in the flow field.     

小展弦比飞翼跨声速典型流动特性研究

小展弦比飞翼标模为国内自主设计的融合体飞翼通用研究模型,前缘后掠角为65°,展弦比为1.54。风洞试验结果表明小展弦比飞翼标模在跨声速迎角4°开始出现非线性升力,在迎角12°至16°范围内会出现升力突然下降、俯仰力矩突然上扬的现象。为了分析该现象的机理,通过数值模拟的方法研究了小展弦比飞翼标模在马赫0.9时的流动特性,分析了前缘涡的产生、发展直至破裂的整个过程,结果表明:小展弦比飞翼标模在迎角4°开始出现涡升力;随着迎角增加,前缘涡逐渐向内侧移动,涡强和背风面激波的强度也逐渐增加,前缘涡与激波发生交叉干扰并达到一个平衡流态;当前缘涡与激波无法维持既有平衡时则会发生涡破裂,流场急剧变化以达到新的平衡,从而导致升力突然下降并产生抬头力矩增量。     

高超声速飞行器流动特征分析

在非流线型构件或突起物的扰动效应、高马赫数和低雷诺数极限效应、低湍流度环境效应和由激波或摩擦导致的气动加热效应等4个方面的影响下,未来高超声速飞行器涉及的流动主要表现出这样的特点:典型流动结构强度高、尺度大,如强激波和厚边界层;局部流动结构数量多;激波、膨胀波和边界层结构之间相互干扰十分严重;转捩、压力脉动和一些流动结构对细微因素非常敏感;压力、摩擦应力和热流峰值现象普遍;升阻比屏障难以突破;流场同时依赖大量无量纲参数和有量纲参数,导致实验模拟难度大。本文在回顾传统高超声速流动主要流动现象的基础上,对上述7个方面涉及的典型流动现象的基础研究现状、问题本质和因果关系进行综合描述,讨论如何更有效地面对基础研究和工程实际问题。该文既可为解决典型流动现象中尚未解决的基础研究提供帮助,也可为如何合理地利用有限的已知知识解决工程应用问题提供指导。     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

荧光油膜技术及其在流动控制中的应用（英文）

研究了运用荧光油膜技术测量全局表面摩擦应力的方法,引入金字塔迭代技术和模拟演化技术提出了该方法的优化求解算法,并通过平板绊线实验对以上方法进行了验证。以此为基础,通过两个典型的流动控制实验进一步探讨了荧光油膜技术在流动控制中的应用,其中包括采用不同参数锯齿形转捩带控制平板流动转捩的被动流动控制实验和不同激励频率下的后台阶零质量射流主动流动控制实验。以上实验测量结果表明,荧光油膜方法能够有效帮助理解流动机理并可用于评估流动控制策略。     

吸气式高超声速飞行器内外流同时测力试验

为研究吸气式高超声速飞行器新型测力试验技术的可行性,在马赫数Ma=6、高度H=27km模拟飞行环境下开展了风洞试验。以轴对称吸气式高超声速飞行器无舵翼简化构型为研究对象,通过合理的试验系统设计解决内外流解耦关键技术,采用两个环式六分量天平在同一车次上测量模型内外流气动力载荷。试验结果表明:内外流气动力天平测量数据和全模气动力数据准确反映了内外流解耦、内外流窜流、进气道起动/不起动以及溢流影响等物理现象;从物理上实现了内外流解耦;内流气动力对全机气动性能贡献大;内外流解耦、进气道起动时,气动力数据准确、重复性好;窜流产生的传力属于内力。试验证明,同时测力试验技术可行,为解决内外流气动数据源于不同试验所致的不确定性问题提供了有效手段。     

涡轮导向叶片综合冷却效率实验研究

为了研究流动参数对涡轮导向叶片综合冷却效率的影响,采用红外热像仪对叶片表面的温度分布进行了测量,得到了叶片的综合冷却效率随流量比、温比、主流进口雷诺数和湍流度的变化规律。实验过程中,次流与主流的流量比分别为0.15,0.18,0.20,0.22和0.24;主次流温比分别为1.4,1.7,1.93和2.2;主流进口雷诺数分别为1.0×10~5,1.1×10~5,1.2×10~5,1.3×10~5和1.4×10~5;主流进口湍流度分别为0.506%,8.156%,14.92%。结果表明,综合冷却效率在前缘处最低,沿流向逐渐升高;增大流量比会显著提高叶片的综合冷却效率,在温比为1.93时,流量比由0.15增大至0.24,综合冷却效率平均增加29.3%;温比和主流进口湍流度的增大均不利于综合冷却效率的提升,流量比为0.20时,温比由1.4增大至2.2,综合冷却效率平均下降46.5%,湍流度由0.506%增大至14.92%,综合冷却效率平均降低15.5%;主流进口雷诺数对叶片综合冷却效率的影响很小。     

机匣处理作用下高负荷轴流压气机转/静子匹配设计研究

为了探索机匣处理作用下转/静子的轴向匹配方法以进一步提高压气机级的失速裕度,研究了静子的叶型安装角及"弯"、"掠"规律对压气机性能的影响,针对机匣处理与优化静子的组合结构进行了非定常数值模拟,阐述了该结构的扩稳机理以及压气机新的失速机制。研究结果表明,在机匣处理作用下,静子成为压气机失速的触发因素,通过对静子叶型安装角及"弯"、"掠"规律的优化均可进一步提高压气机级的失速裕度,其中改变静子"弯"型对压气机级失速裕度的改善最大。组合应用机匣处理与尖部反弯根部正弯静子后,压气机效率基本不变,失速裕度提升了80.2%,较单独使用机匣处理提升30.9%。在该组合结构作用下,压气机的失速由静子触发,静子叶根吸力面在激波作用下发生附面层分离,且与轮毂表面附面层相互作用形成角区涡,接近失速边界时,静子叶根形成"前缘溢流,尾缘反流"现象,造成静子通道的大范围堵塞,诱发压气机失速。压气机级的扩稳应充分考虑机匣处理的影响,对静子进行优化设计。